Complies with：

1. ASTM D6393 - 14 Standard Test Method for Bulk Solids Characterization by Carr Indices;

2. Chinese National Standard GB/T 31057.2 - 2008 Granular materials - Physical properties - Part 2: Determination of tap density;

3. Chinese National Standard GB/T 31057.3 - 2008 Granular materials - Physical properties - Part 3: Fluidity index;

4. Chinese National Standard GB/T 5162 - 2006/ISO 3953:1993 Metallic Powder - Determination of tap density;

5. Chinese National Standard GB/T 1479.1 - 2010 Metallic Powder - Determination of apparent density - Part 1: funnel method;

6. Chinese National Standard GB/T 16913 - 2008 Methods of dust character test - 4.3:Determination of bulk density - Natural Stacking Method;

7. EP 7.0 2.9.34 tapped density of powders;

8. USP32-NF27<616> TAPPED DENSITY OF POWDERS

Supported measurements：

1. Carr Angle of Repose;

2. Carr Angle of Fall;

3. Loose Bulk Density;

4. Tapped Density;

5. Carr Cohesion;

6. Carr Uniformity;

7. Carr Angle of Spatula;

8. Carr Dispersibility;

9. Voidage

Supported calculations：

1. Carr Angle of Difference;

2. Carr Compressibility;

3. Flowability;

4. Floodability

Angle measurement：

protractor，manual method

Tapped density：

Tapped frequency: 260 Rotations/minute, fixed

Drop height: 

3mm, 14mm(Optional)

Repeatability error：

≤1%

Dimensions：

680mm(L)380mm(W)750mm(H)

Voltage：

110/220V 50/60Hz

Sieve screen specification (aperture):

45μm，75μm，150μm，250μm，355μm，1180μm